Should Dual Band Router Have Same SSID?

Can I use both 2.4 and 5GHz at the same time?

Simultaneous Dual Band supports two separate WiFi networks simultaneously using both 2.4- and 5-GHz frequency bands.

It not only doubles the available bandwidth but also allows for a more reliable dedicated WiFi network for video and gaming (5GHz) to be created..

Do dual band routers switch automatically?

Dual-band router has longer range and better signal strength, and despite the broadcasting on two different bands, it is capable of switching automatically when needed. Due to its strong signal, the dual-band router is suitable for online high resolution gaming, video streaming and high resolution audio.

Why does my network have a 2 after it?

This occurrence basically it means your computer has been recognized twice on the network, and since network names must be unique, the system will automatically assign a sequential number to the computer name to make it unique.

What happens if two WiFi networks have the same name?

If the two networks are using the same password and encryption mode as well as the same SSID, then you will see only one name. Your device will see only one wifi. The device will connect to the strongest wifi. You might randomly connect to either of them.

Should I use the same SSID for 2.4 and 5GHz?

Of course, above means fewer support calls to you! Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. … Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

What is multiple SSID settings?

In Multi-SSID mode, the access point creates multiple wireless networks to provide different security and VLAN groups. This mode is suitable when you want your devices connected to different wireless networks and become isolated by VLANs.

Which is better for streaming 2.4 GHz or 5GHz?

Higher radio frequencies allow faster data transmission, so 5GHz allows much faster network connections than 2.4GHz. If you want to use high-bandwidth applications, like streaming video, over your wireless network, 5GHz is by far the better choice.

Can having 2 routers cause problems?

No, two routers will not cause problems. … No, two routers will not cause problems. If they are on the same (or close) channels, it may cause some slowdowns in performance tho, it’s best to get them on channels at least 6 apart, so no part of the bands overlap.

Is it better to separate 2.4 and 5ghz?

No. What you want to do, is get as many devices setup using 5Ghz, and use the 2.4Ghz as a fall-back. The reason is that because 2.4Ghz bands overlap, 2.4Ghz is usually very overcrowded with neighbour networks. 5Ghz allows a faster speed too depending on the specifications.

Can two routers have the same SSID?

You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.

How do I setup multiple routers on the same network?

Set the Internet Gateway of router 2 to router 1’s IP address. Connect the two routers using a wired connection from any of port 1-4 in router 1 to any of port 1-4 in router 2. You can use a Wireless Media Bridge or Powerline Ethernet Kit to create a wired connection. DO NOT use router 2’s WAN port.

Does 5GHz WiFi go through walls?

5 GHz networks do not penetrate solid objects such as walls nearly as well as do 2.4 GHz signals. This can limit an access points reach inside buildings like homes and offices where many walls may come between a wireless antenna and the user. … However, 5GHz networks are not necessarily faster than 2.4GHz.

Why does my router have two SSID?

Some routers offer multiple SSIDs on the same band. One SSID may be a guest network that allows users to connect to the Internet but not to other local devices, while the other SSID allows Internet access and connection to other WiFi devices on that SSID as well as local Ethernet connected devices.

How do I setup 2 routers on the same network?

Connect the two routers. Plug one end of the Ethernet cable into any LAN port of the primary router, then plug the other end of the cable into the LAN port on the back of the second router. If you are creating a LAN-to-WAN network, plug the other end into the WAN (or “Internet”) port on the secondary router.

Can I use 2 routers on the same network?

Yes, it is possible to use two (or even more than two) routers on the same home network. The benefits of a two-router network include: Support for more wired devices: If the first router is the wired Ethernet kind, it supports a limited number of connected devices (typically only four or five).

How much faster is 5GHz than 2.4 GHz?

In summary, 5 GHz is faster and provides a more reliable connection. It’s the newer technology, and it’s tempting to use 5 GHz all the time and write off 2.4 GHz Wi-Fi. But 5 GHz Wi-Fi’s shorter radio waves mean it can cover less distance and isn’t at good as penetrating through solid objects as 2.4 GHz Wi-Fi is.

Should I enable band steering on my router?

Band steering should always be used However, band steering will prove problematic if coverage on 5 GHz is significantly weaker and has coverage holes, as compared to coverage for 2.4 GHz.